MAINTENANCE FOR STATIMS:
DAILY: WASH INTERIOR OF CASSETTE WITH CHLORINE-FREE DISHWASHING DETERGENT. RINSE THOROUGHLY WITH WATER. SPRAY WITH STAT-DRI+ PART # 8OZPLUST

EVERY 6 MONTHS:
REPLACE THE AIR FILTER, BIO FILTER AND CASSETTE SEAL EVERY 500 CYLES OR 6 MONTHS, WHICHEVER COMES FIRST. PLEASE REFERENCE THE OPERATOR'S MANUAL, PART # 01-106938S

WATER QUALITY:
THE RANGE ACCEPTABLE FOR THE STATIM IS 5PPM

(APPROXIMATELY 8 MICROSEIMENS). IF THE WATER IS OUTSIDE OF THAT RANGE YOU WILL SEE "WATER QUALITY NOT ACCEPTABLE" ON THE DISPLAY. SCICAN SELLS A WATER TESTER AVAILABLE FOR OUR DEALERS. SCICAN CONDUCTIVITY METER, PART # 01-103139S

CASSETTE:
DO NOT OVERFILL THE CASSETTES WITH INSTRUMENTS.

SOLENOID CARE:
USE CARE TO ENSURE ALL WIRE PIECES AND DEBRIS FRAGMENTS HAVE BEEN REMOVED FROM INSTRUMENTS BEFORE INSERTING INTO CASSETTE. THESE CAN BECOME TRAPPED IN THE SOLENOID IF NOT REMOVED.

TO PROTECT PUMP:
ENSURE RESERVOIR FILTER IS INSTALLED ON UNIT. DEBRIS CAN

ENTER THROUGH THE RESERVOIR

BOILER CARE:
DO NOT RUN CLEANERS OF ANY TYPE THROUGH BOILER. The only recommendation is to use C L R which is a descaler which can be purchased in a retail store. But, it rarely works, it is a temporary fix. More than likely, the boiler will need to be replaced.

Here's a link to some more information for Statim Troubleshooting Guide