Description: VWR Clamp Holder Talon 19Mm

VWR Talon Regular Clamp Holder

Clamp holder has a maximum grip size of 19mm and allows versatile useage wherever clamping at 90 degrees angle is required.

Price: $18.03

Description: VWR Clamp Holder Talon Jumbo

VWR Talon Heavy-Duty Clamp Holder

Jumbo clamp holder has a maximum grip size of 19mm. Heavy duty version of the regular holder is for use wherever clamping at 90 degrees angle is required. Doubles as a shelf support to hold flat panels or shelves

Price: $26.90

Description: VWR Talon Heavy-Duty Clamp Holder

This jumbo, heavy-duty version of the regular holder is lightweight. Doubles as a shelf support able to hold flat panels or shelves up to 19mm (3/4") thick, or rods up to 19mm (3/4") diameter.

Price: $44.92

Description: VWR Talon Regular Clamp Holder

Use wherever clamping at 90° is required. Features a streamlined design for maximum contamination resistance and easy cleaning.

Price: $30.11

Description: VWR Talon Clamp Holder, Stainless Steel

VWR Talon Clamp Holder, Stainless Steel. Holder secures clamps to lab frames and ring stands and accepts rods up to 21mm (13/16 in) in diameter.

Price: $70.71

Description: VWR Talon All-Position Clamp Holder.

Surpass standard holding capabilities with the all-position clamp holder. Building on the upgraded Q-clamp design, the holder allows adjustment at any angle in any plane. Holders are set at 90° to each other connected by a 90° connector for 360° rotation.

Price: $84.00

Description: VWR Filter Holder W-Gls Supprt

VWR 25mm Filter Holder Low extractable, borosilicate glass with a 15mL graduated funnel, anodized aluminum clamp, and a number 5 silicone stopper. Includes a coarse porosity 40-60um fritted glass support base. Requires 125mL Erlenmeyer filter flask.

Price: $187.97

Description: VWR Filter Holder W-Gls Supprt

VWR 47mm Filter Holder Fritted glass support. Low extractable, borosilicate glass. With a 300mL graduated funnel, anodized aluminum clamp, and a number 8 silicone stopper. Includes a 40-60um porosity fritted glass support base. Requires a 1000mL Erlenme

Price: $219.63

Description: VWR Filter Holder W-Gls Supprt

VWR 47mm Filter Holder, Standard Taper 40-35 Joint Connection Low extractable borosilicate glass. Drip tip on support base extends below hose connection. Number 2 hose connection for 6mm ID tubing. With 300mL graduated funnel, anodized aluminum clamp, 1.

Price: $444.46

Description: VWR Filter Holder W-Ss Support

VWR* 47mm Filter Holder Stainless steel support. Low extractable, borosilicate glass. Has 300mL graduated funnel, anodized aluminum clamp, and number 8 silicone stopper, stainless steel suport with 100 mesh screen, PTFE gasket, and glass support base.

Price: $244.46

Description: VWR 25 mm Filter Holders, No. 5 Stopper

These low extractable borosilicate glass holders are supplied with a 15mL graduated funnel, anodized aluminum clamp, and a No. 5 silicone stopper.

Two types of holders are available. Holder A2L6316-690FA includes a fritted glass support base (40–60µm). Holder A2L6316-692FA includes a 100 mesh stainless steel support screen, PTFE-support screen gasket, and glass support base.

Holders require a 125mL Erlenmeyer filter flask (sold separately). These heavy-wall flasks are manufactured from low extractable borosilicate glass. Side arm accepts 6mm (1/4") I.D. flexible tubing for connection to a vacuum source.

Price: $275.70

Description: VWR 25 mm Filter Holders, No. 5 Stopper

These low extractable borosilicate glass holders are supplied with a 15mL graduated funnel, anodized aluminum clamp, and a No. 5 silicone stopper.

Two types of holders are available. Holder A2L6316-690FA includes a fritted glass support base (40–60µm). Holder A2L6316-692FA includes a 100 mesh stainless steel support screen, PTFE-support screen gasket, and glass support base.

Holders require a 125mL Erlenmeyer filter flask (sold separately). These heavy-wall flasks are manufactured from low extractable borosilicate glass. Side arm accepts 6mm (1/4") I.D. flexible tubing for connection to a vacuum source.

Price: $293.30

Description: Aluminum Clamp for VWR® 25 mm Filter Holders, No. 5 Stopper

Aluminum Clamp for VWR® 25 mm Filter Holders, No. 5 Stopper.

Price: $79.15

Description: Silicone Stopper for VWR® 25 mm Filter Holders

Price: $16.30

Description: Fritted Glass Support Base for VWR® 25 mm Filter Holders

Price: $147.75

Description: Stainless Steel Support Screen for VWR Holders

Price: $105.70

Description: Support Screen Gasket, PTFE for VWR Filter Holders

Pack of 6.

Price: $36.36

Description: Glass Base for Stainless Steel Support for VWR Filter Holder

Price: $65.17

Description: 125 mL, Graduated Filter Flask for VWR Holders

Price: $104.30

Description: 125 mL, Safety-Coated Filter Flask for VWR Holders

Price: $151.00

Description: VWR LABJAWS CLAMP HOLDER SS JUMBO

Price: $71.90

Description: VWR Talon Heavy-Duty Clamp Holder

This jumbo, heavy-duty version of the regular holder is lightweight. Doubles as a shelf support able to hold flat panels or shelves up to 19mm (3/4") thick, or rods up to 19mm (3/4") diameter.

Price: $44.92

Description: VWR Talon Regular Clamp Holder

Use wherever clamping at 90° is required. Features a streamlined design for maximum contamination resistance and easy cleaning.

Price: $30.11

Description: Blue VWR Pipettor Holder

Autoclavable polypropylene holders keep pipettors at your fingertips. Adjustable ABS plastic screws allow secure attachment to table tops and benches up to 3cm (13/16") thick. Accommodate most brands of pipettors. Dimensions: 16Lx10Hcm (61/4x4").

Price: $61.90

Description: Red VWR Pipettor Holder

Autoclavable polypropylene holders keep pipettors at your fingertips. Adjustable ABS plastic screws allow secure attachment to table tops and benches up to 3cm (13/16") thick. Accommodate most brands of pipettors. Dimensions: 16Lx10Hcm (61/4x4").

Price: $61.90